 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MAC12HCD, MAC12HCM, MAC12HCN Preferred Device Triacs Silicon Bidirectional Thyristors Designed primarily for full-wave ac control applications, such as motor controls, heating controls or dimmers; or wherever full-wave, silicon gate-controlled devices are needed. Features http://onsemi.com * * * * * * * * * Uniform Gate Trigger Currents in Three Quadrants, Q1, Q2, and Q3 High Commutating di/dt and High Immunity to dv/dt @ 125C Minimizes Snubber Networks for Protection Blocking Voltage to 800 Volts On-State Current Rating of 12 Amperes RMS at 80C High Surge Current Capability - 100 Amperes Industry Standard TO-220AB Package for Ease of Design Glass Passivated Junctions for Reliability and Uniformity Pb-Free Packages are Available* TRIACS 12 AMPERES RMS 400 thru 800 VOLTS MT2 G MT1 MARKING DIAGRAM MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Rating Peak Repetitive Off-State Voltage (Note 1) (TJ = - 40 to 125C, Sine Wave, 50 to 60 Hz, Gate Open) MAC12HCD MAC12HCM MAC12HCN On-State RMS Current (All Conduction Angles; TC = 80C) Peak Non-Repetitive Surge Current (One Full Cycle, 60 Hz, TJ = 125C) Circuit Fusing Consideration (t = 8.33 ms) Peak Gate Power (Pulse Width 1.0 ms, TC = 80C) Average Gate Power (t = 8.3 ms, TC = 80C) Operating Junction Temperature Range Storage Temperature Range Symbol VDRM, VRRM 400 600 800 IT(RMS) ITSM I2t PGM PG(AV) TJ Tstg 12 100 41 16 0.35 -40 to +125 -40 to +150 A A A2sec W W C C 1 2 3 4 Value Unit V 1 2 3 x A Y WW G TO-220AB CASE 221A-09 STYLE 4 MAC12HCxG AYWW = D, M, or N = Assembly Location = Year = Work Week = Pb-Free Package PIN ASSIGNMENT Main Terminal 1 Main Terminal 2 Gate Main Terminal 2 ORDERING INFORMATION Device MAC12HCD MAC12HCDG MAC12HCM MAC12HCMG MAC12HCN MAC12HCNG Package TO-220AB TO-220AB (Pb-Free) TO-220AB TO-220AB (Pb-Free) TO-220AB TO-220AB (Pb-Free) Shipping 50 Units / Rail 50 Units / Rail 50 Units / Rail 50 Units / Rail 50 Units / Rail 50 Units / Rail Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. VDRM and VRRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2005 Preferred devices are recommended choices for future use and best overall value. 1 December, 2005 - Rev. 3 Publication Order Number: MAC12HC/D MAC12HCD, MAC12HCM, MAC12HCN THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction-to-Case Junction-to-Ambient Symbol RqJC RqJA TL Value 2.2 62.5 260 Unit C/W C Maximum Lead Temperature for Soldering Purposes 1/8 from Case for 10 Seconds ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted; Electricals apply in both directions) Characteristic OFF CHARACTERISTICS Peak Repetitive Blocking Current (VD = Rated VDRM, VRRM, Gate Open) ON CHARACTERISTICS Peak On-State Voltage (Note 2) (ITM = 17 A) Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 100 W) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) Holding Current (VD = 12 V, Gate Open, Initiating Current = 150 mA) Latch Current (VD = 12 V, IG = 50 mA) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) Gate Trigger Voltage (Continuous dc) (VD = 12 V, RL = 100 W) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) DYNAMIC CHARACTERISTICS Rate of Change of Commutating Current (VD = 400 V, ITM = 4.4 A, Commutating dv/dt = 18 V/ms, Gate Open, TJ = 125C, f = 250 Hz, CL = 10 mF, LL = 40 mH, with Snubber) Critical Rate of Rise of Off-State Voltage (VD = Rated VDRM, Exponential Waveform, Gate Open, TJ = 125C) Repetitive Critical Rate of Rise of On-State Current IPK = 50 A; PW = 40 msec; diG/dt = 200 mA/msec; f = 60 Hz 2. Pulse Test: Pulse Width 2.0 ms, Duty Cycle 2%. (di/dt)c 15 - - A/ms VTM - IGT 10 10 10 IH - IL - - - VGT 0.5 0.5 0.5 - - - 1.5 1.5 1.5 - - - 60 80 60 V - 60 mA - - - 50 50 50 mA - 1.85 mA V IDRM, IRRM TJ = 25C TJ = 125C - - - - 0.01 2.0 mA Symbol Min Typ Max Unit dv/dt 600 - - V/ms di/dt - - 10 A/ms http://onsemi.com 2 MAC12HCD, MAC12HCM, MAC12HCN Voltage Current Characteristic of Triacs (Bidirectional Device) + Current Quadrant 1 MainTerminal 2 + Symbol VDRM IDRM VRRM IRRM VTM IH Parameter Peak Repetitive Forward Off State Voltage Peak Forward Blocking Current Peak Repetitive Reverse Off State Voltage Peak Reverse Blocking Current Maximum On State Voltage Holding Current Quadrant 3 MainTerminal 2 - IH VTM IRRM at VRRM on state IH VTM off state + Voltage IDRM at VDRM Quadrant Definitions for a Triac MT2 POSITIVE (Positive Half Cycle) + (+) MT2 (+) MT2 Quadrant II (-) IGT GATE MT1 REF (+) IGT GATE MT1 REF Quadrant I IGT - (-) MT2 (-) MT2 + IGT Quadrant III (-) IGT GATE MT1 REF (+) IGT GATE MT1 REF Quadrant IV - MT2 NEGATIVE (Negative Half Cycle) All polarities are referenced to MT1. With in-phase signals (using standard AC lines) quadrants I and III are used. http://onsemi.com 3 MAC12HCD, MAC12HCM, MAC12HCN 100 VGT, GATE TRIGGER VOLTAGE (VOLT) IGT, GATE TRIGGER CURRENT (mA) Q3 Q2 Q1 10 1.20 1.10 1.00 0.90 0.80 0.70 0.60 0.50 0.40 -40 -25 -10 5 20 35 50 65 80 95 TJ, JUNCTION TEMPERATURE (C) 110 125 Q1 Q2 Q3 1 -40 -25 -10 5 20 35 50 65 80 95 TJ, JUNCTION TEMPERATURE (C) 110 125 Figure 1. Typical Gate Trigger Current versus Junction Temperature 100 MT2 NEGATIVE LATCHING CURRENT (mA) HOLDING CURRENT (mA) 100 Figure 2. Typical Gate Trigger Voltage versus Junction Temperature Q2 Q3 Q1 10 MT2 POSITIVE 10 1 -40 -25 -10 5 20 35 50 65 80 95 TJ, JUNCTION TEMPERATURE (C) 110 125 1 -40 -25 -10 5 20 35 50 65 80 95 TJ, JUNCTION TEMPERATURE (C) 110 125 Figure 3. Typical Holding Current versus Junction Temperature P(AV), AVERAGE POWER DISSIPATION (WATTS) 125 TC, CASE TEMPERATURE ( C) 120, 90, 60, 30 20 18 16 14 12 10 8 6 4 2 0 Figure 4. Typical Latching Current versus Junction Temperature DC 180 120 110 95 180 80 DC 65 0 2 4 6 8 10 IT(RMS), RMS ON-STATE CURRENT (AMP) 12 60 30 90 0 2 4 6 8 10 IT(AV), AVERAGE ON-STATE CURRENT (AMP) 12 Figure 5. Typical RMS Current Derating Figure 6. On-State Power Dissipation http://onsemi.com 4 MAC12HCD, MAC12HCM, MAC12HCN I T, INSTANTANEOUS ON-STATE CURRENT (AMP) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 100 TYPICAL @ TJ = 25C 1 MAXIMUM @ TJ = 125C 10 0.1 1 MAXIMUM @ TJ = 25C 0.01 0.1 1 10 100 t, TIME (ms) 1000 10000 Figure 8. Typical Thermal Response 0.1 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 VT, INSTANTANEOUS ON-STATE VOLTAGE (VOLTS) 5 Figure 7. Typical On-State Characteristics http://onsemi.com 5 MAC12HCD, MAC12HCM, MAC12HCN PACKAGE DIMENSIONS TO-220AB CASE 221A-09 ISSUE AA -T- B 4 SEATING PLANE F T S C NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04 Q 123 A U K H Z L V G D N R J STYLE 4: PIN 1. 2. 3. 4. MAIN TERMINAL 1 MAIN TERMINAL 2 GATE MAIN TERMINAL 2 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 6 MAC12HC/D |
Price & Availability of MAC12HCD05
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |